Metal Working Fluid
gun drill Oil
Gun drilling is also known as deep drilling, involves drilling of holes to a depth some times exceeding 200 to 300 times the holedia.
The quality of the cutting fluid is of great importance since it not only removes the metal chips but also has to provide adequate lubrication to the tool cutting edges, as the tool travel-speed sometimes exceeds 200 mm per minute.
It is very essential for these fluids, to use the right viscosity coolant to ensure good flushing action for the swarf and to maintain the high viscosity flow of the fluid.
Applications
FIBROL Gun Drilling Oils is a heavy-duty oil blends recommended for deep hole drilling, boring, broaching, gun drilling, tapping, milling, threading and honing operations of cast iron, steel and high-speed steel alloys.
These oils are also used in machine tool industries, vertical machining centers, conventional lathe machine, milling, radial drilling machine and in multi spindle drilling.
These oils were specially formulated to meet the higher performance levels required by some machine manufacturers and end-users.
data attribute
benefits
Mineral Base Cutting Oil
FIBROL mineral based water soluble cutting oil is a premium quality soluble cutting oil blended from mineral oil and special additive to provide superior tool life and other benefits. It has excellent emulsion stability with hard water.
Applications
FIBROL mineral based water soluble cutting oil is developed with a high mineral oil content for a variety of metal cutting operations where cooling is important. This high performance soluble oil is designed for general machining like drilling, planning, milling, sawing of ferrous metals.
data attribute
benefits
neat metal cutting Oil
FIBROL neat cutting oil is a range of transparent neat metal cutting oils with active sulphur suitable for a wide range of applications. They are blended from highly refined, high viscosity index base oils with extreme pressure additive.
Lubricity additive ensures reduction in friction at the chip tool interface and provides superior surface finish. These oils are suitable for operations of difficult to machine metals. They tend to stain copper and its alloys.
Applications
These high performance neat cutting oils have different viscosity grades with different levels of extreme pressure capability. They are suitable for all ferrous metals like low carbon steel, bearing steel, tensile steel etc.
data attribute
benefits
Premium RUSTOP 274
These products are free flowing liquids consisting of film forming agents, rust inhibitors, water displacing additives and lubricant base stock, carried by a solvent. On evaporation of solvent, a thin, soft film is obtained. Upon application, these products displace all traces of moisture from the surface.
Rust and corrosion are factors of major economic importance costing industry and consumer’s abnormal expenses. This unwanted expenditure can be curtailed/eliminated markedly through the use of petroleum based temporary rust and corrosion preventives.
Applications
Various protective measures like alloying, plating, painting, etc. are used by the engineering industry to prevent metals from the effects of corrosion. While the measures indicated above are of a permanent / semi-permanent nature, petroleum based rust preventives find wide application for temporary corrosion protection during storage and transportation.
Solvent cut back type rust preventive useful under moderate conditions and for interim protection from rusting.
RUST 173 possesses finger print neutralization and water displacement characteristics.
RUST 179 is a premium quality rust preventive specially developed for intermediate protection.
RUST 274 is a light moderate duty rust preventive giving nondrying film.
data attribute
benefits
Premium Semi Synthetic Cutting Oil
FIBROL Premium semi synthetic cutting oil is a semi-synthetic, water-miscible cutting fluid containing lower percentage of mineral oil. This amber- coloured heavy duty cutting oil is specially formulated for general to severe machining applications on cast iron, carbon steel and ferrous alloys and for less severe operations on stainless steel.
It is suitable for operations like drilling, milling, boring, tapping, reaming, turning and grinding operations. Recommended concentrations are: 3% to 4% for grinding, 5% to 7% for normal operations, and 8% to 12 % for difficult operation.
Applications
FIBROL PREMIUM SEMI SYNTHETIC CUTTING OIL is developed with a high SEMI SYNTHETIC CUTTING oil content for a variety of metal cutting operations where cooling is important. This high performance soluble oil is designed for general machining like drilling, planning, milling, sawing of ferrous metals.
data attribute
benefits
